Home> Products > Dairy Diagnostic

Lincomycin Rapid Test Kit (1in1)

The kit is a competitive colloidal gold immunoassay method. Sample is added to sample hole, if there is Lincomycin (LinCQ) in samples, it will combine with marked antibodies, preventing the marked antibodies from combining the Erythromycin Lincomycin (LinCQ) antigens of NC nitrocellulose membrane. 

Product Name

Lincomycin (LinCQ) Rapid Test Strip



Storage Conditions

Store at 2-8℃   in dry environment.

Expiry date: 12 months

Intended Application

The test strip is used for detecting Lincomycin family in raw commingled cow milk above or below tolerance and/or safe levels.

Technical Data 

Kit sensitivity: 2-10ppb (ng/ml) (Final detection limit)

         Antibiotic         MRL (ug/L)    MTUSBIO Level of Detection
         Lincomycin         20-120 ppb           2-10 ppb

Milk Sample Preparation

1. Collect milk sample from butch, or farm

2. Make sure the milk has no clot.

3. Milk at room temperature, don’t heat or freeze.

4. Thoroughly mix with the reagent before testing.

Test Procedure

1. Read the manual instruction before testing. Be sure the raw commingled milk and test kit is at room temperature.

2. Take one Tube from the box, open tube and take out decided number of test to be perform, Use the test kit within an hour beyond time may cause failure of the test. The unused test strip must be sealed and keep out from sunlight and prevent moisture.

3. Take the milk sample, drop 200ul (about 4-5drops) into the sample-well, and thoroughly dissolve the milk with reagents for 30seconds minutes till the milk presents pink color.

4. Insert the test strip into the sample-well, read the results after 5 minutes.