Home> Products > Animal disease test

Canine parvovirus antigen test card (colloidal gold method)

Canine parvovirus is an acute infectious disease caused by canine parvovirus (CPV) infection in puppies, and is characterized by severe vomiting, hemorrhagic enteritis, and myocarditis.

This reagent is used to detect canine parvovirus antigen in dog feces, rectum, vomit, and saliva, and can be used for screening and auxiliary diagnosis of canine parvovirus infection.

[Principle] 

This reagent is made by the principle of colloidal gold immunochromatographic test (GICA). After the sample is added to the sample well, it moves along the chromatographic membrane with the colloidal gold marker. If the CPV antigen is present in the sample, the detection line is purple. Red, no color response if no CPV antigen is present in the sample.

This reagent selects CPV-specific monoclonal antibodies and uses the sandwich method to measure CPV-specific antigens with high sensitivity and specificity. It has been verified that there is no cross-reaction with other common canine viruses such as canine warm virus.


[Kit composition]

No.

Name

50T / box

1.

test   cards (including straws)

50

2.

Sample   dilution

50bottles

3.

Cotton swab

50 sticks

4.

instruction   manual

1

[Storage and expiry date] Store in a cool and dry place (2-30 ° C), valid for 24 months.


[Sample preparation]

After soaking the cotton swab with normal saline, swab the feces, rectum, vomit, and saliva. Immediately insert the cotton swab into the sample tube containing the diluent. Stir the cotton swab thoroughly until all the samples on the cotton swab are dissolved in the diluent. Place the cotton swab in the tube. The wall is squeezed out and discarded, and the sample solution is left to stand.

Note:

Excessive stool samples may lead to erroneous results (such as the occurrence of black bands, etc.), and can be diluted with the sample dilution solution before testing.

experiment method

1. Tear off the aluminum foil packaging bag of the test card, remove the test card, and place it on a flat, clean surface.

2. Pipette the prepared clear sample supernatant with a matching pipette, and slowly add 2-3 drops (about 60ul) into the sample well vertically and slowly.

3. Leave at room temperature for 5-10 minutes to judge the results. Results longer than 30 minutes are invalid.